TB 9-2320-364-13&P-1
NOTE
Install eyebolts on radiator assembly as noted prior to removal.
26. With the aid of an assistant, install condensor mounting bracket (26) on radiator assembly (23) with two
eyebolts (22) and locknuts (21).
27. Secure condensor mounting bracket (26) to panel (1) with two screws (27) and washers (25).
28. Install condensor stabilizer
bracket (28) on vehicle with two
screws (29), lockwashers (30)
and washers (31).
CAUTION
Make sure that when positioning
and installing hoses on compressor,
hoses do not become kinked. If
hoses become kinked damage to
equipment may result.
NOTE
When positioning two hoses in
double cushion clip, hose 2521
will fit into cutout towards rear of
panel, and hose 2424 will fit into
cutout towards front of panel, as
shown in photo. The wire harness
will follow the path of hose 2424.
29. Position hose 2521 (32), hose 2424 (33) and wire harness (34) in double cushion clip (35) and install
support bar (36) and double cushion clip (35) on condensor stabilizer bracket (28) with screw (37) and
locknut (38). Do not tighten locknut (38).
0055-32