TB 9-2320-364-13&P-1
a.
Condensor Installation.
1.
Using template 3535369, enlarge two
eyebolt openings on panel (1).
2.
Using template 3535370, mark and drill two 3/8 in. (9.53 mm) holes (2) in panel (1).
NOTE
Ether start aid assembly will be attached to panel using holes drilled in Step (2).
Ether bottle needs to be installed at a slight angle.
3.
Install ether start aid assembly (TM 9-2320-364-20).
4.
Using lower bracket of ether start aid, mark and drill 3/8 in. (9.53 mm) hole (3) in panel (1).
0055-28