TB 9-2320-364-13&P-2
CAB SIDE (REAR) ARMOR REPLACEMENT - CONTINUED
0028 00
INSTALLATION - CONTINUED
N OT E
Seat belt brackets in this procedure only apply to vehicles with 3-point seat belts.
2.
With assistance, install cab side (rear) armor (15), washer (30), bolt (29), seat belt bracket (1), washer (3), and new lock-
nut (4) in cab side (rear) armor. Hand tighten locknut.
N OT E
Skip step 3 if vehicle is equipped with cab side (rear) applique.
3.
Install six washers (17), bolts (16), washers (18), and new locknuts (19) on side of cab. Hand tighten locknuts.
4.
Install washer (23), bolt (22), seat belt bracket (9), washer (11), and new locknut (10) in cab side (rear) armor (15). Hand
tighten locknut.
5.
Install washer (26), bolt (25), washer (8) and new locknut (7) in cab side (rear) armor (15). Hand tighten locknut.
6.
Install handle (24), washer (28), bolt (27), attachment plate (2), washer (6), and new locknut (5). Hand tighten locknut.
7.
Install washer (21), bolt (20), attachment plate (14), washer (13), and new locknut (12). Hand tighten locknut.
8.
Close cab door and measure gap between rear edge of door and front edge of cab side (rear) armor (15). Gap should be
between 1/8 in. (3.2 mm) and 3/8 in. (9.5 mm). Adjust position of cab side (rear) armor as necessary.
9.
Tighten locknuts to 35 ft-lb (47.5 Nm).
10.
If removed, install cab side (rear) applique (WP 0028 01).
1 (HIDDEN)
3
4
2
5
6
7
8
9 (HIDDEN)
10
11
29,30
12
13
27,28
14
25,26
15
24
22,23
16
19
18
20,21
417-051
17
END OF WORK PACKAGE
Change 1
0028 00-4