TB 9-2320-364-13&P-2
CAB SIDE (FRONT) ARMOR AND SIDE MARKER REPLACEMENT - CONTINUED
0029 00
REMOVAL
1.
Disconnect two side marker (9) electrical connectors from behind cab side armor (3).
2.
Remove nine bolts (6) and washers (7) from cab side armor assembly (3).
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may cause injury or death to personnel.
N OT E
Cab side armor assembly weighs 49 lb (22 kg).
3.
With assistance, remove four bolts (1), washers (2), and cab side armor assembly (3) from vehicle.
4.
If damaged, remove spacers (4) from behind cab side armor assembly (3).
DISASSEMBLY
N OT E
Lower side marker shown. Upper side marker is identical.
1.
Remove two screws (13) and side marker cover (12) from cab side armor assembly (3).
2.
Remove four locknuts (11), washers (10), bolts (5), side marker (9), and side marker gasket (8) from cab side armor
assembly (3). Discard locknuts.
4
3
2
1
13
5
8
7
11 10
6
9
12
417-086
Change 1
0029 00-2