TB 9-2320-364-13&P-2
CAB SIDE (FRONT) ARMOR AND SIDE MARKER REPLACEMENT - CONTINUED
0029 00
INSTALLATION
1.
If removed, use sealing compound and attach four spacers (4) to side of cab.
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may cause injury to personnel.
N OT E
Cab side armor assembly weighs 49 lb (22 kg).
2.
With assistance, position cab side armor assembly (3) and install four washers (2) and bolts (1) on side of cab.
3.
Connect two side marker (9) wires to cab wire harness.
N OT E
Ensure spacers are aligned with four bolt (1) holes.
4.
Install four washers (2) and bolts (1) on cab side armor assembly (3).
5.
Install nine washers (7) and bolts (6) on cab side armor assembly (3).
4
3
2
1
13
5
8
7
11 10
6
9
12
417-086
6.
Verify operation of side marker lights (TM 9-2320-364-10).
7.
Install door assembly (WP 0015 00).
8.
If removed, install cab side (front) applique (WP 0029 01).
END OF WORK PACKAGE
Change 1
0029 00-4