TB 9-2320-364-13&P-2
CAB SIDE (FRONT) APPLIQUE AND SIDE MARKER REPLACEMENT - CONTINUED
0029 01
REMOVAL
1.
Remove four screws (1) and two side marker covers (2) from side of cab.
2
1
440-071
2.
Disconnect two side marker wiring connectors (9) from inside cab.
N OT E
There are spacers between cab side (front) applique and cab side (front) armor. Spacers are attached to cab
side (front) armor with sealing compound.
3.
Remove four bolts (4) and washers (5) from cab side (front) applique (3).
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may cause injury or death to personnel.
N OT E
Cab side (front) applique weighs 29 lb (13 kg).
4.
With assistance, remove four nuts (7), washers (8), and cab side (front) applique (3) from vehicle.
5.
If damaged, remove four spacers (6) from cab side (front) armor assembly (14).
6.
Remove eight locknuts (11), washers (12), bolts (13), and two side markers (10) from cab side (front) applique (3). Dis-
card locknuts.
Change 1
0029 01-2