TB 9-2320-364-13&P-2
CAB SIDE (REAR) APPLIQUE REPLACEMENT - CONTINUED
0028 01
INSTALLATION
WARN I N G
Use caution when using adhesives and sealants. Prolonged inhalation of vapors can cause lung irritation.
Contact with skin can cause dermatitis. Wear gloves and safety goggles and use product in a well-ventilated
area away from open flame. If ingested, keep individual calm and seek medical attention. DO NOT induce
vomiting. If contact with skin or eyes is made, flush thoroughly with water. Dispose of cleanup rags IAW
local policy and ordinances. Failure to follow this warning may cause injury to personnel.
N OT E
Apply thread adhesive to all bolts that thread into spacers.
1.
Apply thread adhesive to seven bolts.
2.
Install three mounts (6), washers (4), and bolts (5) on side of cab.
3.
Install two brackets (3), washers (2), bolts (1), and threaded spacers (7) on side of cab.
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may cause injury or death to personnel.
N OT E
Cab side (rear) applique weighs 45 lb (20 kg).
4.
With assistance, install cab side (rear) applique (8), three washers (9), and bolts (10) on side of cab.
5.
Install grab handle (13), two washers (11), and bolts (12) on side of cab.
END OF WORK PACKAGE
0028 01-3/(0028 01-4 Blank)
Change 1