II113300-1-103
Rev. A
cc) Install the door reflector that was previously removed from the door using the hardware
shown in Figure 30.
dd) Remove the five remaining 0.250-20 x 4.750-in.-long bolts located in the door and attach
the previously removed side mirror using the hardware shown in Figure 30.
Bolt, Hex Head,
0.250-20 x 4.750 Long,
Washer 0.250 ID
Lock Nut 0.250-20,
Washer 0.250 ID
Lock Nut 0.250-20,
Washer 0.250 ID
Bolt, Cap Head,
0.250-20 x 1.250 Long
Side Mirror
(Previously Removed)
Side Reflector
(Previously Removed)
Figure 30. Mirror and Side Reflector installation.
0037 00-58