II113300-1-103
Rev. A
Page 71
aa) Attach the Headlight Bracket (P/N 113374-1-103) on the left side of the vehicle using the
hardware shown in Figure 53.
bb) Route the Pigtail Adapter (P/N 111438-4) through the hole in the armor and cab as
shown in Figure 53. Insert the rubber grommet into the hole located at the center of the
Light Cover (P/N 113379-1-103) that was installed in Step (f). Connect the
corresponding wire leads located inside the cab.
cc) Attach the Marker Light to the Headlight Adapter (P/N 111442-1-103) using the
hardware shown in Figure 53.
dd) Install the Headlight Adapter with the Marker Light on the Headlight Bracket
(P/N 113374-1-103) using the hardware shown in Figure 53.
ee) Re-connect the corresponding wire leads on the Marker Light.
ff) Attach the Headlight to the Headlight Bracket using the hardware that was previously
removed, and re-connect the corresponding wire leads on the Headlight.
gg) Attach the Headlight Bracket (P/N 113374-3-103) on the right side of the vehicle using
the hardware shown in Figure 54.
hh) Route the Pigtail Adapter (P/N 111438-4) through the hole in the armor and cab as
shown in Figure 54. Insert the rubber grommet into the hole located at the center of the
Headlight Cover (P/N 113379-1-103) that was installed in Step (f). Connect the
corresponding wire leads located inside the cab.
ii) Attach the Marker Light to the Headlight Adapter (P/N 111442-1-103) using the
hardware shown in Figure 54.
jj) Install the Headlight Adapter with the Marker Light on the Headlight Bracket
(P/N 113374-1-103) using the hardware shown in Figure 54.
kk) Re-connect the corresponding wire leads on the Marker Light.
ll) Attach the Headlight to the Headlight Bracket using the hardware that was previously
removed, and re-connect the corresponding wire leads on the Headlight.
mm) Attach the previously removed Weight Marker to the Headlight Bracket using the
hardware shown in Figure 54.
0037 00-83