II113300-1-103
Rev. A
3.5.7 Install Armor Kit, Underbody, PLS, P/N 113360-1-103
a) Using a lifting device, position the Center Mineblast Panel (P/N 113363-1-103) into its
installed location (see Figure 56). Route the Glad Hands line and Electrical Connector
through the opening in the Center Mineblast Panel (see Figure 57).
b) Insert the Spacers (P/N 113369-1-103) between the Center Mineblast Panel and Truck
Frame Cross Member and install the hardware shown in Figure 56.
c) Attach the Center Mounting Plate (P/N 113367-1-103) to the Center Mineblast Panel
using five (5) 0.500-13 x 1.750-in.-long bolts, as shown in Figure 56 and Figure 58.
d) Install the remaining hardware, as shown in Figure 56.
e) Remove the lifting device and re-install the Glad Hands, Electrical Connector, Torque
Rod, and Steering Link that were previously removed (see Figure 59).
0037 00-87