II113300-1-103
Rev. A
l)
Connect the mating end of the Pigtail Adapter (P/N 111438-1) to the Blackout Light wire
that was previously disconnected. Remove the rubber boot from the other end of the
Pigtail Adapter and rout the wire through a hole in the armor as shown in Figure 50.
Re-install the rubber boot.
m) Using the original hardware, attach the Blackout Light to the bracket, as shown in
n) Connect the Pigtail Adapter to the wire leading to the Blackout Light.
Blackout Light and
Hardware
(Previously Removed)
Pigtail Adapter,
P/N 111438-3
Figure 50. Front Blackout Light.
0037 00-79