DRAFT
TB 9-2320-364-13&P-1
AC HEATER/EVAPORATOR BLOWER DOES NOT OPERATE - Continued
WARNING
Remove rings, bracelets, wristwatches, neck chains, and any other jewelry before working around
vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry or tools may short
across electrical circuits or terminals and cause damage to equipment or severe burns or
electrical shock to personnel.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
VERIFY REPAIR
(1) If removed, install cover and four screws, washers,
and lockwashers on AC heater/evaporator
assembly (WP 0034).
(2) If removed, install two upper plenums
(TM 9-2320-364-20).
(3) If removed, install heater compartment access
panel and eight screws (TM 9-2320-364-20).
(4) If removed, install left ECB cover and six screws
(TM 9-2320-364-20).
(5) Turn engine start switch ON (TM 9-2320-364-10).
(6) Verify AC heater/evaporator blower operation
(a) If AC heater/evaporator blower does not
operate, fault is not corrected. Turn fan control
and engine start switch OFF and notify
Supervisor.
(b) If AC heater/evaporator blower operates, fault
has been corrected.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
PLSAC160
END OF WORK PACKAGE
