TM 5-3990-263-13&P
0005
OPERATION - Continued
WARNING
When NO TRANSIT indicator is illuminated, vehicle may be maneuvered in the immediate
vicinity of the loading/unloading site. However, vehicle is unsafe for road travel. Do not
perform open-road driving when NO TRANSIT indicator is illuminated. Failure to comply may
result in serious injury or death to personnel and damage to equipment.
28.
Release joystick (Figure 7, Item 17) when LHS hook (Figure 7, Item 18) is fully stowed and NO TRANSIT
indicator light (Figure 7, Item 23) goes out.
29.
Set HIGH IDLE switch (Figure 7, Item 16) to OFF position.
CAUTION
While maneuvering vehicle in the immediate vicinity of the loading or unloading site, LHS
MODE SELECT switch may be in any setting. However, LHS MODE SELECT switch must
be set to OFF prior to road travel. Failure to comply may result in damage to main frame and
hook arm cylinders.
30.
Turn LHS MODE SELECT switch (Figure 7, Item 13) to OFF.
31.
Set PTO ENGAGE switch (Figure 7, Item 14) to OFF position. Indicator light (Figure 7, Item 15) will go out.
32.
Ensure BAP hold-down locks (Figure 8, Item 9) have handles pushed in to lock BAP to vehicle.
9
SHOWN WITHOUT BAP INSTALLED
FOR CLARITY
Figure 8. Checking BAP Hold Down Locks.
END OF TASK
END OF WORK PACKAGE
