TM 5-3990-263-13&P
0010
OPERATION
NOTE
In case of emergency while the remote control unit is in use, push the emergency stop
switch to shut down operation of the LHS.
During all vehicle operations, the operator will drive and be responsible for the operation
of the LHS cab control box. The assistant acts as a ground guide and will be responsible
for directing the operator using hand signals, operating the remote control box and winch,
and assisting the operator as needed.
1.
Ensure launch conditions comply with established controlled launch conditions. Refer to Bridge Bay Launching
Introduction. (WP 0009)
2.
Ensure the BAP is locked to the vehicle and that BAP hold-down lock handles (Figure 1, Item 1) are pushed
in.
1
SHOWN WITHOUT BAP INSTALLED
FOR CLARITY
Figure 1.
Check BAP Hold Down Locks.
3.
Secure winch frame to LHS hook arm. Ensure two winch frame locking levers (Figure 2, Item 2) are in the
down position.
03/15/2011Rel(1.8)root(opusualwp)wpno(O01058)