TM 5-3990-263-13&P
0011
OPERATION - Continued
a.
Rotate latch pin (Figure 21, Item 21) until rear guide (Figure 21, Item 20) disengages.
b.
Swing rear guide (Figure 21, Item 20) to full inboard position and ensure pin (Figure 21, Item 22) engages.
CAUTION
Always ensure selector valve is returned to the closed position after lowering center roller.
Open selector valve could cause all fluid to drain out of lines and render center roller
inoperable until hydraulic system is bled. Failure to comply may result in damage to
equipment.
43.
Move hand pump selector valve (Figure 22, Item 24) to down position.
25
24
Figure 22.
Lower Center Roller.
44.
After center roller returns to stowed position, move hand pump selector valve (Figure 22, Item 24) to center
position.
END OF TASK
END OF WORK PACKAGE