TM 5-3990-263-13&P
0012
OPERATION
NOTE
In case of emergency while the remote control unit is in use, push the emergency stop
switch to shut down operation of the LHS.
During all vehicle operations, the operator will drive and be responsible for the operation
of the LHS cab control box. The assistant acts as a ground guide and will be responsible
for directing the operator using hand signals, operating the remote control box and winch,
and assisting the operator as needed.
With a 20 percent slope, interior bay requires a water depth of at least 42 in. (1.07 m).
Ramp bay requires a water depth of at least 50 in. (1.27 m).
The BAP must be loaded on Transporter before retrieval of bridge bays.
1.
Lock the BAP to the vehicle. Ensure curb-side and road-side BAP holddown lock handles (Figure 1, Item 1)
are in.
1
SHOWN WITHOUT BAP INSTALLED
FOR CLARITY
Figure 1. Setting BAP Locks.
2.
Secure winch frame to LHS hook arm. Ensure two winch frame locking levers (Figure 2, Item 2) are in the
down position.
03/15/2011Rel(1.8)root(opusualwp)wpno(O01061)
