TM 5-3990-263-13&P
0033
CORRECTIVE ACTION - Continued
WINCH IN VALVE
AND SOLENOID
POSITION 2
POSITION 1
Figure 17. WINCH IN Solenoid Connector.
3.
Place positive (+) probe of multimeter on position 2 of WINCH IN solenoid (Figure 17). Check
multimeter for continuity.
a.
If continuity is not present, replace WINCH IN directional control valve.
Refer to TM 9-2320-435-10 or TM 9-2320-425-10.
b.
If continuity is present, replace digital cab control box. Refer to TM 9-2320-435-10 or TM
9-2320-425-10.
END OF WORK PACKAGE
03/15/2011Rel(1.8)root(tswp)wpno(T03029)