TM 5-3990-263-13&P
FIELD MAINTENANCE
LABEL REPLACEMENT
INITIAL SETUP:
References
Tools and Special Tools
Drill, Electric, Portable, 1/4-inch
Parts Manual (WP 0073, Figure 2)
(WP 0078, Table 2, Item 1)
Parts Manual (WP 0073, Figure 10)
Drill Set, Twist (WP 0078, Table 2, Item 1)
Tool Kit, Blind Rivet (WP 0078, Table 2, Item 1)
Equipment Condition
Tool Kit, General Mechanics: Automotive
Load removed from the BAP. (WP 0008)
(WP 0078, Table 2, Item 2)
BAP unloaded from the CBT. (WP 0006)
Materials/Parts
Drive Screw (WP 0082, Table 1, Item 30) Qty:
4
Rivet (WP 0082, Table 1, Item 29) Qty: 4
REMOVAL
NOTE
All nine BAP labels (decals/data plates) are replaced in the same manner.
Eight labels are secured with drive screws. The label on the toolbox door is secured with
rivets.
Remove label (Figure 1, Item 1) and four drive screws (Figure 1, Item 2) or rivets (Figure 1, Item 3) from the
BAP.
0051-1
03/15/2011Rel(1.8)root(maintwp)wpno(M04046)