TM 5-3990-263-13&P
FIELD MAINTENANCE
FRONT PIN LOCK ASSEMBLY ADJUSTMENT AND REPAIR
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Locknut (WP 0082, Table 1, Item 24) Qty: 2
Pliers, Retaining Ring (WP 0078, Table 2, Item 1)
Tool Kit, General Mechanics: Automotive
Cotter Pin (WP 0082, Table 1, Item 51) Qty: 2
(WP 0078, Table 2, Item 2)
Wrench, Adjustable (WP 0078, Table 2, Item 1)
Personnel Required
Wrench, Torque, 50-250 lb-ft (68-339 Nm), 1/2 in.
(2)
Drive (WP 0078, Table 2, Item 7)
References
Materials/Parts
Parts Manual (WP 0073, Figure 11)
Goggles, Safety (WP 0081, Table 1, Item 9)
Parts Manual (WP 0073, Figure 26)
Lockwasher (WP 0082, Table 1, Item 42)
Lockwasher (WP 0082, Table 1, Item 43) Qty: 2
Cotter Pin (WP 0082, Table 1, Item 35) Qty: 2
Cotter Pin (WP 0082, Table 1, Item 33) Qty: 1
Equipment Condition
Front pin lock reflector removed. (WP 0050)
REMOVAL
NOTE
BAP front pin lock should be in stowed position for steps 1 through 3.
Repair of curb-side and road-side pin locks is the same. Road-side pin lock is shown.
1.
Remove air hose (Figure 1, Item 1) from elbow (Figure 1, Item 2) on BAP frame (Figure 1, Item 3).
0052-1
03/15/2011Rel(1.8)root(maintwp)wpno(M04047)