TM 5-3990-263-13&P
0064
REMOVAL - Continued
23.
Release coupling half (Figure 2, Item 56) from coupling half (Figure 2, Item 59), and remove coupling half
(Figure 2, Item 59) from BAP frame.
24.
Remove adapter (Figure 2, Item 60) from tube nut (Figure 2, Item 61) on one end of tubing (Figure 2, Item 62).
Loosen tube nut (Figure 2, Item 61) on other end of tubing (Figure 2, Item 62), and disconnect tubing (Figure
2, Item 62) from adapter (Figure 2, Item 63). Remove tubing (Figure 2, Item 62) from BAP frame.
25.
Loosen two hose clamps (Figure 2, Item 64) from air hose (Figure 2, Item 65).
26.
Loosen two adapters (Figure 2, Items 66 and 67) on ends of air hose (Figure 2, Item 65), and disconnect air
hose (Figure 2, Item 65) from elbow (Figure 2, Item 68), two hose clamps (Figure 2, Item 64), and air cylinder
(Figure 2, Item 69).
27.
Remove adapters (Figure 2, Items 66 and 67) from air hose (Figure 2, Item 65).
28.
Remove adapter (Figure 2, Item 63), elbow (Figure 2, Item 68), and coupling (Figure 2, Item 70) from BAP
frame.
END OF TASK
INSTALLATION
NOTE
For general air tubing repair instructions, proceed to BAP General Air Tubing Assembly
Instructions.
Steps (1) through (17) apply only to road-side air lines. Proceed to Step (18) for curb-
side air lines.
1.
Install two hose clamps (Figure 3, Item 64) on air hose (Figure 3, Item 65).
0064-5
03/15/2011Rel(1.8)root(maintwp)wpno(M04058)
