TM 5-3990-263-13&P
FIELD MAINTENANCE
FRONT BAP LOCK REPLACEMENT
INITIAL SETUP:
References
Tools and Special Tools
Tool Kit, General Mechanics: Automotive
Parts Manual (WP 0073, Figure 25)
(WP 0078, Table 2, Item 2)
Equipment Condition
Materials/Parts
BAP unloaded to ground. (WP 0006)
Engine turned off (TM 9-2320-435-10 or TM
Cotter pin (WP 0082, Table 1, Item 32) Qty: 4
9-2320-425-10). (WP 0076)
Locknut (WP 0082, Table 1, Item 20) Qty: 1
Wheels chocked (TM 9-2320-435-10 or TM
Cotter pin (WP 0082, Table 1, Item 15) Qty: 1
9-2320-425-10). (WP 0076)
Locknut (WP 0082, Table 1, Item 6) Qty: 1
Personnel Required
(2)
REMOVAL
NOTE
Front bap locks are located on right and left sides of vehicle. Both bap locks are replaced
the same way. Right side shown.
Model B trucks are equipped with shims between bap lock and frame.
1.
Remove two screws (Figure 1, Item 1) and plate (Figure 1, Item 2) from bracket (Figure 1, Item 3).
0066-1
03/15/2011Rel(1.8)root(maintwp)wpno(M04077)
