TM 5-3990-263-13&P
0066
INSTALLATION - Continued
WARNING
Lock is under spring tension. Use extreme care when removing pin. Ensure all personnel
wear safety glasses and keep hands and fingers clear of lock when pin is being removed.
Failure to comply may result in injury or death to personnel.
NOTE
Assistant must pry lock up into position while mechanic installs pin.
Use one or more spacer washers as needed to fill gap between bracket and lock without
binding lock. Some installations may not need spacer washer.
6.
With the aid of an assistant, install lock (Figure 6, Item 8) in bracket (Figure 6, Item 3) with flat washer (Figure
6, Item 18) and pin (Figure 6, Item 19).
7.
Install washer (Figure 7, Item 18), spacer washer (Figure 7, Item 20), and cotter pin (Figure 7, Item 17) in pin
(Figure 7, Item 19).
0066-7
03/15/2011Rel(1.8)root(maintwp)wpno(M04077)