II113300-1-103
Rev. A
NOTE
When installing the Rear Left Panel to the Armored Roof Panel,
loosen the two bolts that attach the Side Rear Panel Assembly to
the Rear Left Panel. This will allow the parts to move into the
correct position as the bolts shown in Figure are tightened.
Bolt, Hex Head (Qty 2),
0.375-16 x 1.750 Long,
Bolt, Hex Head (Qty 2),
Washer 0.375 ID
0.375-16 x 1.250 Long,
Washer 0.375 ID
Lock Nut 0.375-16,
Washer 0.375 ID
Figure 42. Installing the Antenna Mount, Left Side.
i)
Attach the Right Rear Left Panel to the Armored Roof Panel using the hardware shown
in Figure 43. Do not fully tighten the bolts at this time. Tighten the bolts such that the
top of the top surface of the angled bracket is 0.00 to 0.60 in. from the bottom surface of
the Roof Panel.
0037 00-71
