TM 5-3990-263-13&P
0010
OPERATION - Continued
WARNING
After releasing rear guides, only winch hook secures bridge bay to the BAP. Personnel must
not mount the BAP and must stay clear of the area around rear of vehicle. The load could
shift, release, or fall. Failure to comply may result in serious injury or death to personnel.
14.
Set curb-side and road-side rear guides (Figure 10, Item 23) to fully open position:
23
25
24
Figure 10. Open Rear Guides.
a.
Rotate latch pin (Figure 10, Item 24) until rear guide (Figure 10, Item 23) disengages.
b.
Swing rear guide (Figure 10, Item 23) until latch pin (Figure 10, Item 24) engages in rear of bay guide
(Figure 10, Item 25).
NOTE
Dashboard parking brake indicator will go out when PARKING BRAKE control is released.
15.
Push in PARKING BRAKE control (Figure 11, Item 26).
03/15/2011Rel(1.8)root(opusualwp)wpno(O01058)
