TM 5-3990-263-13&P
0032
CORRECTIVE ACTION - Continued
MALFUNCTION
WINCH OUT Solenoid Harness is Faulty (Model A Only).
CORRECTIVE ACTION
CAUTION
Electrical power must be shut OFF from circuit before continuity can be checked.
Failure to comply with this caution may result in damage to test equipment or
electrical system.
1.
Remove connector from WINCH OUT solenoid (Figure 10).
SOLENOID
CONNECTOR,
POSITION 1
SOLENOID
CONNECTOR,
POSITION 2
WINCH OUT
SOLENOID HARNESS
Figure 10. WINCH OUT Solenoid Connector.
2.
Set multimeter to ohms position.
NOTE
A reading of infinity indicates an open circuit.
Junction box terminal 33 is connected to one side of solenoid and terminal 34
is connected to other side of solenoid.
3.
Place negative (-) probe of multimeter on position 33 of main frame junction box terminal strip
(Figure 11).