TM 5-3990-263-13&P
0035
Table 1.
Operator Preventive Maintenance Checks and Services - Continued
ITEM TO BE
EQUIPMENT
ITEM
CHECKED OR
NOT READY/
NO.
INTERVAL
SERVICED
PROCEDURE
AVAILABLE IF:
Turn LHS MODE SELECT switch (Figure 1, Item 1) to
OFF. LHS ENGAGED indicator (Figure 1, Item 5) light
will go out.
Set PTO ENGAGE switch (Figure 1, Item 3) in OFF.
Ensure indicator light (Figure 1, Item 4) goes off.
Turn vehicle off. Refer to TM 9-2320-425-10 or TM
9-2320-435-10.
3
Before
Leaks
Check underneath vehicle for evidence of obvious fluid Any Class III leak is
leakage. If leakage is detected, further investigation is evident.
needed to determine location and cause of leak. If there
is any doubt, contact your supervisor or Field
maintenance.
4
Before
Dust Covers
Check to see if dust covers (Figure 2, Item 1) are present
and installed on winch hose quick disconnect couplings
(Figure 2, Item 2).
2
2
1
Figure 2.
Dust Covers.
5
Before
BAP Winch
Check winch (Figure 3, Item 1) for obvious damage and Hardware is missing.
Assembly and
loose or missing hardware.
Cable Tensioner
03/15/2011Rel(1.8)root(pmcswp)wpno(I04003)
