TM 5-3990-263-13&P
0035
Table 1.
Operator Preventive Maintenance Checks and Services - Continued
ITEM TO BE
EQUIPMENT
ITEM
CHECKED OR
NOT READY/
NO.
INTERVAL
SERVICED
PROCEDURE
AVAILABLE IF:
10
Before
Center Roller
Inspect center roller assembly (Figure 8, Item 1) for
Center roller is damaged
Assembly
damage and freedom of movement.
or will not move properly.
2
3
1
Figure 8. Center Roller.
Inspect hydraulic pump assembly (Figure 8, Item 2) for Hydraulic pump assembly
proper operation:
will not operate properly.
Position select lever (Figure 8, Item 3) to center
roller position (up).
Pump hydraulic pump assembly (Figure 8, Item
2), and ensure center roller assembly (Figure
8, Item 1) is free to move.
Position select lever (Figure 8, Item 3) to OFF
position (center).
Inspect center roller hydraulics for leaks.
Any Class III leak is
evident.
11
Before
Left and Right
Check for loose or binding handle (Figure 9, Item 1):
Handle is missing or
Rear Guide
inoperative. Rear guide
Rotate handle (Figure 9, Item 1).
Assemblies
Move rear guide (Figure 9, Item 2) to its fullest assembly will not operate.
open and closed positions. Rear guide (Figure
9, Item 2) and handle (Figure 9, Item 1) should
move freely
Inspect rear guide assembly for cracks, bends,
or broken welds.
03/15/2011Rel(1.8)root(pmcswp)wpno(I04003)
