TM 5-3990-263-13&P
0055
INSTALLATION - Continued
37
38
28
39
42 43
41
40
18
45
44
46
47
48
49
51
56
57
50
58
55
54
52
53
60
59
63
62
61
Figure 6. Winch Hydraulic Tubes Installation.
3.
Install elbow (Figure 6, Item 56) and preformed packing (Figure 6, Item 58) on top of winch motor (Figure 6,
Item 53).
4.
Install tube nut (Figure 6, Item 50) and tube (Figure 6, Item 51) on elbow (Figure 6, Item 52) on side of winch
motor (Figure 6, Item 53).
NOTE
Make sure breather valve is facing rear of the BAP when installing valve block.
5.
Install valve block (Figure 6, Item 28) on winch frame (Figure 6, Item 18) with two bolts (Figure 6, Item 40),
washers (Figure 6, Item 41), lockwashers (Figure 6, Item 42), and nuts (Figure 6, Item 43).
6.
Install straight adapter (Figure 6, Item 38) and preformed packing (Figure 6, Item 39) on side of valve block
(Figure 6, Item 28).
03/15/2011Rel(1.8)root(maintwp)wpno(M04049)
