TM 5-3990-263-13&P
0055
REMOVAL - Continued
64
65
65
66
2
4
Figure 4. Winch Quick Disconnect Bracket Removal.
END OF TASK
CLEANING
Refer to General Maintenance Instructions (WP 0038) for general cleaning instructions.
END OF TASK
INSPECTION
Refer to General Maintenance Instructions (WP 0038) for general inspection instructions.
END OF TASK
INSTALLATION
NOTE
Do not tighten captive nuts until all tubes are installed.
Apply a light film of grease on all O-rings and preformed packings before installation.
1.
Install dummy quick-disconnect coupling halves (Figure 5, Items 2 and 4) on mounting bracket (Figure 5, Item
66) with two screws (Figure 5, Item 64) and lockwashers (Figure 5, Item 65).
03/15/2011Rel(1.8)root(maintwp)wpno(M04049)