TM 5-3990-263-13&P
FIELD MAINTENANCE
WINCH HYDRAULIC SYSTEM REPLACEMENT
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Lockwasher (WP 0082, Table 1, Item 43) Qty: 2
Pan, Drain, 5-Gallon (WP 0078, Table 2, Item 1)
Tool Kit, General Mechanics: Automotive
Preformed Packing (WP 0082, Table 1, Item 17)
(WP 0078, Table 2, Item 2)
Qty: 2
Lockwasher (WP 0082, Table 1, Item 46) Qty: 2
Materials/Parts
Grease (WP 0081, Table 1, Item 10, 11, 12, 13,
References
14)
Parts Manual (WP 0073, Figure 12)
Backup Ring (WP 0082, Table 1, Item 7) Qty: 1
Parts Manual (WP 0073, Figure 14)
Preformed Packing (WP 0082, Table 1, Item 8)
Parts Manual (WP 0073, Figure 17)
Qty: 1
O-ring (WP 0082, Table 1, Item 22) Qty: 2
Equipment Condition
Preformed Packing (WP 0082, Table 1, Item 14)
Load removed from the BAP. (WP 0008)
Qty: 2
BAP removed from the CBT. (WP 0006)
Preformed Packing (WP 0082, Table 1, Item 13)
Qty: 1
REMOVAL
CAUTION
Do not remove tube nuts and flared tube sleeves from hydraulic tubes unless there is leakage
or other damage to tubes, tube nuts, or flared tube sleeves that make them unserviceable.
NOTE
Use a drain pan to catch fluid draining from hoses and fittings. Wipe up any spillage with
a rag. Handle, store, and dispose of drained fluids in accordance with local policies and
procedures.
Tag all hoses and tubes before disconnecting. Note if each hose or tube has a male or
female connector.
1.
Remove male quick-disconnect coupling half (Figure 1, Item 1) from dummy female quick-disconnect coupling
half (Figure 1, Item 2).
0055-1
03/15/2011Rel(1.8)root(maintwp)wpno(M04049)