TM 5-3990-263-13&P
0044
REMOVAL - Continued
4.
Remove lubrication fitting (Figure 1, Item 13) from center roller assembly (Figure 1, Item 4).
END OF TASK
CLEANING
1.
Refer to General Maintenance Instructions (WP 0038) for general cleaning instructions.
2.
Lubricate parts in accordance with Lubrication Instructions (WP 0070).
END OF TASK
INSPECTION
Refer to General Maintenance Instructions (WP 0038) for general inspection instructions.
END OF TASK
INSTALLATION
1.
Install lubrication fitting (Figure 2, Item 13) in center roller assembly (Figure 2, Item 4).
11
10
12
9
7
8
6
9
10
7
2
5
1
13
4
3
5
Figure 2.
Center Roller Installation.
2.
Place rear cylinder carriage (Figure 2, Item 12) on the BAP. Install two rear strap pins (Figure 2, Item 11),
spring pins (Figure 2, Item 10), and pull straps (Figure 2, Item 9) on rear cylinder carriage (Figure 2, Item 12).
3.
Place center roller carriage (Figure 2, Item 6) on the BAP. Install two front strap pins (Figure 2, Item 8) in pull
straps (Figure 2, Item 9) and center roller carriage (Figure 2, Item 6). Install two spring pins (Figure 2, Item 7)
on front strap pins (Figure 2, Item 8).
4.
Install pin (Figure 2, Item 3), two thrust washers (Figure 2, Item 5), and center roller assembly (Figure 2, Item
4) on center roller carriage (Figure 2, Item 6).
03/15/2011Rel(1.8)root(maintwp)wpno(M04039)