TM 5-3990-263-13&P
0052
ASSEMBLY - Continued
NOTE
Mount pin lock bracket at same height as noted during disassembly.
2.
Install pin lock bracket (Figure 7, Item 5) on frame (Figure 7, Item 3) with four screws (Figure 7, Item 41) and
washers (Figure 7, Item 42). Tighten screws to 75 and 80 ft-lb (101.7 and 108.5 Nm).
3.
With the aid of an assistant, install pin lock guide (Figure 7, Item 6) on pin lock bracket (Figure 7, Item 5) with
pin lock pin (Figure 7, Item 39), two washers (Figure 7, Item 40), and cotter pins (Figure 7, Item 38).
4.
Install wear pad (Figure 8, Item 37) on pin lock jaw (Figure 8, Item 34) with two screws (Figure 8, Item 35) and
locknuts (Figure 8, Item 36).
36
35
37
6
34
33
32
11
30
29
31
28
Figure 8.
BAP Front Pin Lock Assembly.
5.
Install pin lock jaw (Figure 8, Item 34) on pin lock guide (Figure 8, Item 6) with headed straight pin (Figure 8,
Item 33), washer (Figure 8, Item 32), and cotter pin (Figure 8, Item 31).
6.
Install torsion spring (Figure 8, Item 30) on pin lock guide (Figure 8, Item 6) with pivot latch (Figure 8, Item 11),
washer (Figure 8, Item 29), and cotter pin (Figure 8, Item 28).
7.
Install breather (Figure 9, Item 27) on air cylinder (Figure 9, Item 16).
03/15/2011Rel(1.8)root(maintwp)wpno(M04047)
