TM 5-3990-263-13&P
FIELD MAINTENANCE
WINCH MOTOR ASSEMBLY REPLACEMENT
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
O-ring (WP 0082, Table 1, Item 10) Qty:
1
Pan, Drain, 5-Gallon (WP 0078, Table 2, Item 1)
Tool Kit, General Mechanics: Automotive
O-ring (WP 0082, Table 1, Item 23) Qty:
1
(WP 0078, Table 2, Item 2)
References
Materials/Parts
Parts Manual (WP 0073, Figure 14)
Grease
Parts Manual (WP 0073, Figure 16)
(WP 0081, Table 1, Item 10, 11, 12, 13, 14)
Parts Manual (WP 0073, Figure 17)
Rag (WP 0081, Table 1, Item 21)
Packing, Preformed
Equipment Condition
(WP 0082, Table 1, Item 17) Qty: 2
Load removed from the BAP. (WP 0008)
Seal, Plain (WP 0082, Table 1, Item 12) Qty: 1
BAP unloaded from the CBT. (WP 0006)
Lockwasher (WP 0082, Table 1, Item 47) Qty: 2
REMOVAL
NOTE
Use a drain pan to catch fluid draining from hoses and fittings. Wipe up any spillage with a
rag. Handle, store, and dispose of drained fluids in accordance with local policies and
procedures.
1.
Loosen both ends of two tubes (Figure 1, Items 1 and 2) on two elbows (Figure 1, Items 3 and 4). Loosen two
captive nuts (Figure 1, Items 5 and 6) and remove elbows (Figure 1, Items 3 and 4) and two preformed packings
(Figure 1, Items 7 and 8) from winch hydraulic motor (Figure 1, Item 9). Discard preformed packings.
0059-1
03/15/2011Rel(1.8)root(maintwp)wpno(M04052)
