TM 5-3990-263-13&P
0058
INSTALLATION - Continued
12
15
14
14
13
13
12
16
Figure 9. Upper Cable Guide Shaft Installation.
7.
Remove filler plug (Figure 10, Item 34) from end cover (Figure 10, Item 11), and fill winch with oil Lubrication
Instructions (WP 0070). Install filler plug (Figure 10, Item 34) in end cover (Figure 10, Item 11).
34
11
Figure 10.
Fill Winch.
8.
Install tube (Figure 11, Item 8) on elbow (Figure 11, Item 9). Install two elbows (Figure 11, Item 4) and new
preformed packings (Figure 11, Item 6) on winch motor (Figure 11, Item 7), and tighten two captive nuts (Figure
11, Item 5). Install two hydraulic tubes (Figure 11, Item 3) on elbows (Figure 11, Item 4).
03/15/2011Rel(1.8)root(maintwp)wpno(M04051)
