TM 5-3990-263-13&P
0060
INSPECTION - Continued
2.
Inspect hoses, tubes, fittings, and hydraulic cylinders for leaks or damage (such as damaged threads) that
would make them unserviceable. Replace any unserviceable parts.
END OF TASK
INSTALLATION
1.
Install fitting (Figure 5, Item 35) on frame (Figure 5, Item 7). Install fitting (Figure 5, Item 36) on hand pump
(Figure 5, Item 37). Install tube (Figure 5, Item 34) on two fittings (Figure 5, Items 35 and 36).
20
21
23
22
24
29
19
17
7
25
18
26
27
33
30
32
37
31
28
35
7
34
36
Figure 5.
Manifold Installation.
2.
Install fitting (Figure 5, Item 32) on frame (Figure 5, Item 7). Install tube (Figure 5, Item 30) on fitting (Figure
5, Item 32). Install fitting (Figure 5, Item 33) on tube (Figure 5, Item 30).
3.
Install two nuts (Figure 5, Item 25), lockwashers (Figure 5, Item 26), four cushion clamps (Figure 5, Item 27),
and two bolts (Figure 5, Item 28) on tubes (Figure 5, Items 29 and 30) and welded bracket (Figure 5, Item 31)
on frame (Figure 5, Item 7).
4.
Install plug (Figure 5, Item 23) and O-ring (Figure 5, Item 24) on manifold (Figure 5, Item 17). Install manifold
(Figure 5, Item 17) on frame (Figure 5, Item 7) using two bolts (Figure 5, Item 20), lockwashers (Figure 5, Item
21), and washers (Figure 5, Item 22).
5.
Install fitting (Figure 5, Item 19) on manifold (Figure 5, Item 17). Install tube (Figure 5, Item 18) on fitting (Figure
5, Item 19).
6.
Install tube (Figure 5, Item 18) on fitting (Figure 5, Item 33).
7.
Install two screws (Figure 6, Item 11), lockwashers (Figure 6, Item 12), and hydraulic cylinders (Figure 6, Item
13) on rear carriage (Figure 6, Item 9).
03/15/2011Rel(1.8)root(maintwp)wpno(M04053)
