TM 5-3990-263-13&P
FIELD MAINTENANCE
TRANSLOAD ROLLER HYDRAULIC SYSTEM REPAIR
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Lockwasher (WP 0082, Table 1, Item 43) Qty: 4
Pan, Drain, 5-Gallon (WP 0078, Table 2, Item 1)
Tool Kit, General Mechanics: Automotive
Lockwasher (WP 0082, Table 1, Item 50) Qty: 6
(WP 0078, Table 2, Item 2)
Lockwasher (WP 0082, Table 1, Item 41) Qty: 3
Materials/Parts
References
Grease (WP 0081, Table 1, Item 10, 11, 12, 13,
Parts Manual (WP 0073, Figure 8)
14)
Parts Manual (WP 0073, Figure 22)
Lubricating Oil (WP 0081, Table 1, Item 17, 18, 19,
Parts Manual (WP 0073, Figure 23)
20)
Rag (WP 0081, Table 1, Item 21)
Tape, Antiseizing (WP 0081, Table 1, Item 23)
Equipment Condition
Lockwasher (WP 0082, Table 1, Item 42) Qty: 1
Load removed from the BAP. (WP 0008)
Lockwasher (WP 0082, Table 1, Item 39) Qty: 2
BAP unloaded from the CBT. (WP 0006)
O-ring (WP 0082, Table 1, Item 21) Qty: 2
REMOVAL
NOTE
Use a drain pan to catch fluid draining from hoses and fittings. Wipe up any spillage with
a rag. Handle, store, and dispose of drained fluids in accordance with local policies and
procedures.
Procedures for the curb-side and road-side transload roller guard plates and hydraulic
cylinders, hoses, and fittings are the same, except as otherwise noted.
1.
Remove screw (Figure 1, Item 1), lockwasher (Figure 1, Item 2), and nut (Figure 1, Item 3) from guard plate
(Figure 1, Item 4). Remove two screws (Figure 1, Item 5) and lockwashers (Figure 1, Item 6) from guard plate
(Figure 1, Item 4) and mounting plate (Figure 1, Item 7). Discard lockwashers.
0061-1
03/15/2011Rel(1.8)root(maintwp)wpno(M04054)