TM 5-3990-263-13&P
0063
REMOVAL - Continued
5.
Remove two bolts (Figure 1, Item 10), lockwashers (Figure 1, Item 11), lanyard (Figure 1, Item 12), valve
bracket (Figure 1, Item 2), and two nuts (Figure 1, Item 13) from control valve (Figure 1, Item 14) and BAP
frame (Figure 1, Item 15). Discard lockwashers.
6.
Remove elbow (Figure 1, Item 16) from tubing (Figure 1, Item 17).
7.
Remove two adapters (Figure 1, Item 18) from two tubings (Figure 1, Item 19).
8.
Remove elbow (Figure 1, Item 16) and two adapters (Figure 1, Item 18) from control valve (Figure 1, Item 14).
END OF TASK
INSTALLATION
1.
Install elbow (Figure 2, Item 16) and two adapters (Figure 2, Item 18) on control valve (Figure 2, Item 14).
0063-3
03/15/2011Rel(1.8)root(maintwp)wpno(M04057)