TM 5-3990-263-13&P
0045
ADJUSTMENT
NOTE
With rear guide in fully closed position, gap between rear guide and rear roller should be 1/4
inch (6.3 mm).
1.
With rear guide (Figure 5, Item 4) in fully closed position, measure the gap between rear guide (Figure 5, Item
4) and rear roller (Figure 5, Item 27).
4
27
1/4
INCH
17
Figure 5.
Rear Guide Adjustment.
2.
If gap is more than 1/4 inch (6.3 mm), turn screw (Figure 5, Item 17) clockwise to decrease gap. If gap is less
than 1/4 inch (6.3 mm), turn screw (Figure 5, Item 17) counterclockwise to increase gap.
END OF TASK
END OF WORK PACKAGE
03/15/2011Rel(1.8)root(maintwp)wpno(M04040)