TM 5-3990-263-13&P
FIELD MAINTENANCE
REAR ROLLER ASSEMBLY REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
References (cont.)
Tool Kit, General Mechanics: Automotive
(WP 0078, Table 2, Item 2)
Materials/Parts
Equipment Condition
Lockwasher (WP 0082, Table 1, Item 45) Qty:
2
Load removed from the BAP. (WP 0008)
BAP unloaded from the CBT. (WP 0006)
Rear guide in full open position. (WP 0008)
References
Parts Manual (WP 0073, Figure 6)
REMOVAL
1.
Remove two bolts (Figure 1, Item 1), lockwashers (Figure 1, Item 2), and plate clamp (Figure 1, Item 3) from
axle (Figure 1, Item 4). Discard lockwashers.
4
6
5
3
2
1
7
2
1
Figure 1. Rear Roller Assembly Removal.
2.
Remove rear roller assembly (5) and shim (6) from axle (4).
3.
Remove grease fitting (7) from end of axle (4).
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M04042)
