TM 5-3990-263-13&P
0047
CLEANING
Refer to General Maintenance Instructions (WP 0038) for general cleaning instructions.
END OF TASK
INSPECTION
Refer to General Maintenance Instructions (WP 0038) for general inspection instructions.
END OF TASK
INSTALLATION
1.
Install grease fitting (Figure 2, Item 7) on end of axle (Figure 2, Item 4).
4
6
5
3
2
1
7
2
1
Figure 2. Rear Roller Assembly Installation.
2.
Install shim (Figure 2, Item 6) and rear roller assembly (Figure 2, Item 5) on axle (Figure 2, Item 4).
3.
Install plate clamp (Figure 2, Item 3) on end of axle (Figure 2, Item 4), and align holes in plate clamp (Figure
2, Item 3) with holes in axle (Figure 2, Item 4).
4.
Insert two bolts (Figure 2, Item 1) and lockwashers (Figure 2, Item 2) in plate clamp (Figure 2, Item 3).
5.
Lubricate rear roller assembly (WP 0070).
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M04042)
