TM 5-3990-263-13&P
0068
CABLE DRUM ASSEMBLY INSTALLATION - Continued
37
47
26
48
33
Figure 7.
Final Housing Installation.
NOTE
Perform Step (2) only if bearing was removed.
2.
Install bearing (Figure 7, Item 48) in final housing (Figure 7, Item 26).
WARNING
Wear safety goggles and use care when installing bearing retainer. It is under spring tension
and can act as a projectile when released. Failure to comply may result in serious injury or
death to personnel.
3.
Install bearing retainer (Figure 7, Item 33) in final housing (Figure 7, Item 26).
4.
With the aid of an assistant, install final housing (Figure 7, Item 26) in cable drum (Figure 7, Item 37).
5.
Install secondary drive planetary gear (Figure 8, Item 46) on cable drum (Figure 8, Item 37).
03/15/2011Rel(1.8)root(maintwp)wpno(M05030)