TM 5-3990-263-13&P
0068
CABLE DRUM ASSEMBLY INSTALLATION - Continued
37
46
45
44
43
42
41
40
Figure 8. Cable Drum Assembly Installation.
6.
Install shim (Figure 8, Item 43) in primary sungear (Figure 8, Item 42).
7.
Install spacer (Figure 8, Item 45) on primary drive planetary gear (Figure 8, Item 44).
8.
Install primary drive planetary gear (Figure 8, Item 44) in cable drum (Figure 8, Item 37).
9.
Install primary sungear (Figure 8, Item 42) in primary drive planetary gear (Figure 8, Item 44).
NOTE
Perform Step (10) only if cylindrical roller race was removed.
10.
Install cylindrical roller race (Figure 8, Item 41) in cable drum (Figure 8, Item 37) using an arbor press.
11.
Install oil seal (Figure 8, Item 40) in cable drum (Figure 8, Item 37). Ensure oil seal (Figure 8, Item 40) is flush
with cable drum (Figure 8, Item 37) rim.
END OF TASK
BRAKE HOUSING INSTALLATION
1.
Install spacer (Figure 9, Item 38) on brake housing (Figure 9, Item 5).
03/15/2011Rel(1.8)root(maintwp)wpno(M05030)