TM 5-3990-263-13&P
FIELD MAINTENANCE
WINCH REPAIR
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Lockwasher (WP 0082, Table 1, Item 11) Qty: 16
Arbor Press (WP 0078, Table 2, Item 3)
Spacer (WP 0082, Table 1, Item 5) Qty: 2
Pliers, Retaining Ring, 6 1/2 in. (WP 0078, Table
2, Item 1)
Pliers, Retaining Ring, 1 1/2 in. (WP 0078, Table
Personnel Required
2, Item 1)
(2)
Tool Kit, General Mechanics: Automotive
(WP 0078, Table 2, Item 2)
Wrench Set, Socket (WP 0078, Table 2, Item 1)
References
Wrench, Torque, 20-100 lb-ft (27-136 Nm), 3/8 in.
Parts Manual (WP
0073, Figure 16)
Drive (WP 0078, Table 2, Item 6)
Parts Manual (WP
0073, Figure 18)
Parts Manual (WP
0073, Figure 19)
Parts Manual (WP
0073, Figure 20)
Materials/Parts
Parts Manual (WP
0073, Figure 21)
Crocus Cloth (WP 0081, Table 1, Item 7)
Goggles, Safety (WP 0081, Table 1, Item 9)
Grease (WP 0081, Table 1, Item 10, 11, 12, 13,
Equipment Condition
14)
Winch assembly removed. (WP 0058)
Tape, Antiseizing (WP 0081, Table 1, Item 23)
Winch motor assembly removed. (WP 0059)
Lockwasher (WP 0082, Table 1, Item 47) Qty: 4
Gasket and Seal Set (WP 0082, Table 1, Item 9)
Qty: 1
BRAKE HUB ASSEMBLY REMOVAL
1.
Remove pipe plug (Figure 1, Item 1) from motor adapter (Figure 1, Item 2).
0068-1
03/15/2011Rel(1.8)root(maintwp)wpno(M05030)